- ENGINE:
31.0 HP, Daihatsu Liquid Cooled, 3 cylinder, cast iron block
- IGNITION:
Electric, key-start, electronic function, electronic governor
- VACUUM BLOWER:
Tuthill
Pneumatics 4007X Tri-Lobe
- HydraMaster Exclusive, MD Pneumatics Tri-Lobe
Design
- Pulsation and Sound Reduced
- No Grease Fittings, Oil bath at both ends
- Helical Gear Drive, Oil-Level Sight Windows
- WATER PUMP:
Cat Pump, 4.2 gpm, 1000 PSI operating pressure
- CHEMICAL SYSTEM:
High pressure injected, meter controlled, last-step
- HEATING SYSTEM:
1 Stainless steel coil engine exhaust exchanger
1 Copper shell and tube blower exhaust exchanger
2 Engine coolant heat exchangers
- INSTRUMENTS:
Water pressure gauge, liquid filled, 0-1500 PSI
Hour meter, machine runtime
Keyed ignition, start/stop
Chemical flow meter, diagnostic panel
Water temperature gauge, vacuum level gauge
Heat bypass lamp, overheat protection lamp
Overheat shutdown lamp
Diagnostic center
- RECOVERY TANK:
100 gallon aluminum, epoxy finish
Sloped bottom
- CLEANING WAND:
Stainless steel with heat shield
Replaceable grip
Rebuildable solution valve
- HIGH PRESSURE HOSE:
1/4" high temperature lined/vinyl covered
Hose rated to 2200 PSI working pressure
- VACUUM HOSE:
2" Reinforced, 1-1/2" reinforced
- FRAME:
24.5" W x 47.75" L x 37.38" H
Steel with baked on epoxy finish
- WEIGHT:
1073 lbs. (Console & Recovery Tank)
|
- ENGINE:
Maxx 450: 23.5 HP, Daihatsu Liquid Cooled, 3 cylinder, cast
iron block
Maxx 450D: Diesel 23.6 HP, Daihatsu Liquid Cooled, 3
cylinder, cast iron block & cast iron head
- IGNITION:
Electric, key-start, electronic function, electronic governor
- VACUUM BLOWER:
Tuthill
Pneumatics 4005X Tri-Lobe
- HydraMaster Exclusive, MD Pneumatics Tri-Lobe
Design
- Pulsation and Sound Reduced
- No Grease Fittings, Oil bath at both ends
- Helical Gear Drive, Oil-Level Sight Windows
- WATER PUMP:
Cat Pump, 4.2 gpm, 1000 PSI operating pressure
- CHEMICAL SYSTEM:
High pressure injected, meter controlled, last-step
- HEATING SYSTEM:
1 Stainless steel coil engine exhaust exchanger
1 Copper shell and tube blower exhaust exchanger
2 Engine coolant heat exchangers
- INSTRUMENTS:
Water pressure gauge, liquid filled, 0-1500 PSI
Hour meter, machine runtime
Keyed ignition, start/stop
Chemical flow meter, diagnostic panel
Water temperature gauge, vacuum level gauge
Heat bypass lamp, overheat protection lamp
Overheat shutdown lamp
Diagnostic center
- RECOVERY TANK:
100 gallon aluminum, epoxy finish
Sloped bottom
- CLEANING WAND:
Stainless steel with heat shield
Replaceable grip
Rebuildable solution valve
- HIGH PRESSURE HOSE:
1/4" high temperature lined/vinyl covered
Hose rated to 2200 PSI working pressure
- VACUUM HOSE:
2" Reinforced, 1-1/2" reinforced
- FRAME:
24.5" W x 47.75" L x 37.38" H
Steel with baked on epoxy finish
- WEIGHT:
860 lbs. -Maxx 450 (Console & Recovery Tank)
|
